Nigel Mummery had a great idea at the 2010 RS National Day this weekend....
Why not have a section on the forum to try and keep track of the parts used to make our cars, where they came from and what can we replace them with, that way it saves us all re-inventing the wheel (or any other part for that matter) when the chances are someone has done it already !
If you have something to contribute then just reply to this post.
Periodically a moderator will take the information and tidy it up into this first posting to keep it all easy to read.
I'll start us off in keeping with the image on the forum......
Front indicators are from a Mk1 Ford Sierra
Right Hand Side - Part Number 83BG13368AA - Finis Code 6096585
Left Hand Side - Part Number 83BG13369AA - Finis Code 6096587
So lets start this thread off...
-
Justin Smith
- Posts: 523
- Joined: Sun Mar 08, 2009 11:15 pm
Anyone know where our drive shaft gaiters come from ?
For headlights, I used Golf Mk2 7" H4. They come with their own fixing frame that allows fitment to a flat vertical surface. Some are metal framed others are plastic, both are good.
Very bright too.
Driveshaft boot wise, Partco or similar should be able to match up given the inner /outer dia and overall length, or take the boot in for a match up.
Hope this helps.
Mike
Very bright too.
Driveshaft boot wise, Partco or similar should be able to match up given the inner /outer dia and overall length, or take the boot in for a match up.
Hope this helps.
Mike